Titanium Tools and Equipment Inc

The difference between the Miracle Essentials Basic kit  and the other Miracle Essentials kit is the type of stud welder and easy puller the Miracl...

Miracle Essentials Plus kit comes with an ESA inspected manual-automatic stud welder (MS-6) complete with a slide hammer, accessory box, Miracle gr...

This high tef oil is great for lubricating the cable that attaches to Easy Puller I and II for smooth operation and less wear of the clips and tool...

It is a replacement special bit for the Easy Puller III.

Yellow Cone Shaped Multipads 6 x 22 x 156. Packing Unit: 3 pieces.

Suction cup with pull release Loading capacity: 10kg / 22lbs Suction cup diameter: 75 mm or 3 inches Complete suction cup with the handle: 7 inche...

Red Flat Multipads 6 x 22 x 156. Packing Unit: 3 pieces.

Suction cup with vacuum pump and leakage indicator Concave pod for curved surfaces Loading capacity: 20kg / 44lbs

To be used with the mini extractor, 31305 and mini extractor kit, 31340.

Included in this Kit: Mini extractor for suction cups striker 250gr | 31305 Extension for wedges | 3134000 Radial wedge medium point | 31212 Domed...

Yellow Glue Sticks works best with Miracle System glue gun or any other quality glue gun. Packing Unit: 15 pieces.

For best results, please use these glue sticks with the Miracle System Glue Kit. Packing Unit: 15 pieces.

Yellow Round Suction Cups Ø 40. Packing Unit: 10 pieces.

Yellow Oval Suction Cups Ø 33 x 47. Packing Unit: 10 pieces.

Violet Oval Suction Cups Ø 33 x 47. Packing Unit: 10 pieces.

Violet Round Suction Cups Ø 40. Packing Unit: 10 pieces.

Red Round Suction Cups Ø 11. Packing Unit: 10 pieces.

Blue Round Suction Cups Ø 36. Packing Unit: 10 pieces.

Grey Flat Multipads 6 x 50 x 156. Packing Unit: 3 pieces.

Green Spherical Multipads 6 x 22 x 156. Packing Unit: 3 pieces.

Blue Flat Multipads 6 x 36 x 156. Packing Unit: 3 pieces.

For use with Miracle System Tools. Included in this Kit: Easy Puller, and slide hammers hook for use with round pads | MSG-HK1 Strong Puller, lever...

Features: Improves Productivity Reduces damage without removing paint Great for aluminum panels Can be used with existing pulling tools or with M...

Aluminum alloy One Piece casting Light and well balanced Anti-shock grip Storage hook Can be used as chisels

The Miracle hammer rubber face vertical peen has the following features: Rubber face prevents marring of surfaces Aluminum alloy One Piece casting...

The Miracle hammer rubber face horizontal peen has the following features: Aluminum alloy One Piece casting Light and well balanced Anti-shock gri...

Included in this Kit: Miracle Hammer Horizontal Peen, Large | MHS-01 Miracle Hammer Horizontal Peen, Medium | MHS-02 Miracle Hammer Horizontal Pe...

Aluminum alloy One Piece casting Light and well balanced Anti-shock grip Storage hook Can be used as chisels

The Easy Puller III is the newest easy puller from Star. Featuring a rechargeable LED light to highlight the imperfections in the panel. A bearing ...

Easy puller II is a simplified version of the Easy puller 10Z. With a fixed frame this is an economical way to repair small dings and finish panels...

These washers can be welded with minimum electric current, resulting in very little damage to the panel Can be used for strong places like; quarte...

The spot welding tip allows you to tack thin patches for repair quickly and easily prior to MIG welding.

Aluminum alloy One Piece casting Light and well balanced Anti-shock grip Storage hook Can be used as chisels

Aluminum alloy One Piece casting Light and well balanced Anti-shock grip Storage hook Can be used as chisels

The carbon rod allows you to heat up the metal panel without leaving the job to get a torch. The heat can be controlled by touching the metal surfa...

The roll patching tip allows you to repair small torn areas on a panel quickly and easily.

Features: Rotating clamp eliminates damage to the cable over time No switch needed, welds on contact Included in Kit: ONA-01: Hand Type ONA-02: ...

Features: Easy to pull out outer panels Push and pull mechanism Strong but light weight Included in this Kit: Puller Frame Corner Foot Flat Foot...

Aluminum alloy One Piece casting Light and well balanced Anti-shock grip Storage hook Can be used as chisels

This is the attachment cable for attaching Easy Puller I and II to the welding machine. It has 1 clip and one Pin. The Pin inserts in to the end of...

This is the attachment cables for attaching easy puller I and II to the welding machine. It has 2 clips allowing the welding attachment to stay in ...

Pull and hammer at the same time Simple and effective Flexible - can be used in various ways

Feel and apply the necessary tension by hand Can be used for pulling and removing Hand puller kit, 2 pieces  

This is a high quality gearless grinder that has excellent feel for precise grinding of panels. With the Miracle system, we only grind where we wil...

Ideal for high tensile steel Holds the panel under tension while you pull Leaves almost no mark on the back of the panel Fast and precise No stret...

The bit cutter trims the straight and twisted key by one mm each time you use the bit cutter providing you with a new edge each time. It is particu...

Included in this Kit: Manual and Automatic Stud Welder complete with slide hammer, accessory box, and Miracle Grip. ESA inspected | MS-6 Miracle ...

Included in this Kit: Manual and Automatic Stud Welder complete with slide hammer, accessory box, and Miracle Grip. ESA inspected | MS-6 Miracle S...