Titanium Tools and Equipment Inc

0.6 mm flat staple for the hot stapler. Pack of 100pcs.

0.6 mm wave staple for the hot stapler. Pack of 100pcs.

0.8 mm flat staple for the hot stapler. Pack of 100pcs.

0.8 mm inside corner staple for the hot stapler. Pack of 100pcs.

0.8 mm outside corner staple for the hot stapler. Pack of 100pcs.

0.8 mm wave staple for the hot stapler. Pack of 100pcs.

Catalogue | Videos Use the Airopower Standard Kit and add the Airopower 19 to cover a large range of repair applications. Repairs that can be don...

Catalogue | Videos Use the Airopower Standard Kit and add the Airopower 33 to cover a larger range of repair applications. Easily store the Airo...

Catalogue | Videos This is a 53 piece Accessory Kit ONLY. The Airopower Standard Kit needs to be purchased separately.   The Mini Frame Machine ...

Catalogue | Videos Use the Airopower Standard Kit and add the Airopower 9 to cover more range of repair applications. Repairs that can be done wi...

Angles are adjustable using an Allen key Useful to push and pull various points on the vehicle. It can be used in trunks and on frame railings

Used for pulling keys with the Airopower Standard Kit. Please see pictures.

170mm Airopower adjusting tube.

290mm Airopower adjusting tube.

Used to connect the Airopower Chains.

2 chains, each 2 meters in length.

Clamp for push and pull Fits to flanged edge of car trunk Fits to narrow edge of car roof  

To push and pull wide areas from an angle Can also be used to push and pull corners

The airopower deluxe trolley is specially designed to store the airopower system. A standard kit fits on the top shelf and all the airopower access...

125mm Airopower extension tube.

170mm Airopower extension tube.

300mm Airopower extension tube.

500mm Airopower extension tube.

Comes as a set of 2.

The grooved rubber prevents the panel edge from damage.

The Airopower knock pin is used for holding clamps, pins, and adapters in place.

The Airopower L-type pin is used for holding/linking the extension tube and the adjusting tube together.

DISCONTINUED and REPLACED with the Go Max Mobile Vertical Dent Pulling Vacuum Tower The Airopower mini tower has a 5-ton capacity and is used with...

With single adapter to allow swivel.  

Attach to cylinder for two way extension.

This is a non-threaded adapter to be used with your accessories. Please note, this adapter has to be purchased separately as it is not included in ...

Fits to multiclamp and grooved foot for swivel operation.

Catalogue | Videos Airopower is a pneumatic 5.25 tons push and pull ram that eliminates the problems of leaking porta powers yet is far more ver...

Product Description Shield your Airopower cart and accessories with the EP-COVER, a custom-fit protective cover that guards against weather, dust,...

Attach to cylinder to connect adjusting pipe.

This is a non-threaded adapter to be used with your accessories. Please note, this adapter has to be purchased separately as it is not included in ...

Allows application to different angles.

Fits to flanged edge of the car trunk Fits to narrow edge of the car roof Fits to narrow side of the sill panel

The bit cutter trims the straight and twisted key by one mm each time you use the bit cutter providing you with a new edge each time. It is particu...

The bit holder allows you to hold all three key types and attach them to the panel. MB-1, MB-2 and MB-3 fit in the slot and hold the key tightly.

Blue Flat Multipads 6 x 36 x 156. Packing Unit: 3 pieces.

Blue Round Suction Cups Ø 36. Packing Unit: 10 pieces.

Used with shrink tube to repair the Miracle ground clamp, MME-00.

The carbon rod allows you to heat up the metal panel without leaving the job to get a torch. The heat can be controlled by touching the metal surfa...

The Airopower collar toe is used together with the plunger toe for pushing and pulling vehicle parts like the door space.

Catalogue | Videos Introducing the Complete Airopower System – a powerhouse kit combining the Airopower Standard Kit with the Airopower 53-Piece ...

Easy puller hook for aluminum bits MAB-PA and MAB-PSP.

Easy puller II is a simplified version of the Easy puller 10Z. With a fixed frame this is an economical way to repair small dings and finish panels...