Airopower

Catalogue | Videos Introducing the Complete Airopower System – a powerhouse kit combining the Airopower Standard Kit with the Airopower 53-Piece ...

Catalogue | Videos Airopower is a pneumatic 5.25 tons push and pull ram that eliminates the problems of leaking porta powers yet is far more ver...

Catalogue | Videos This is a 53 piece Accessory Kit ONLY. The Airopower Standard Kit needs to be purchased separately.   The Mini Frame Machine ...

Catalogue | Videos Use the Airopower Standard Kit and add the Airopower 33 to cover a larger range of repair applications. Easily store the Airo...

Catalogue | Videos Use the Airopower Standard Kit and add the Airopower 19 to cover a large range of repair applications. Repairs that can be don...

Catalogue | Videos Use the Airopower Standard Kit and add the Airopower 9 to cover more range of repair applications. Repairs that can be done wi...

Product Description Shield your Airopower cart and accessories with the EP-COVER, a custom-fit protective cover that guards against weather, dust,...

Angles are adjustable using an Allen key Useful to push and pull various points on the vehicle. It can be used in trunks and on frame railings

170mm Airopower adjusting tube.

290mm Airopower adjusting tube.

Used for pulling keys with the Airopower Standard Kit. Please see pictures.

2 chains, each 2 meters in length.

Used to connect the Airopower Chains.

Clamp for push and pull Fits to flanged edge of car trunk Fits to narrow edge of car roof  

To push and pull wide areas from an angle Can also be used to push and pull corners

The airopower deluxe trolley is specially designed to store the airopower system. A standard kit fits on the top shelf and all the airopower access...

125mm Airopower extension tube.

170mm Airopower extension tube.

300mm Airopower extension tube.

500mm Airopower extension tube.

Comes as a set of 2.

The grooved rubber prevents the panel edge from damage.

The Airopower L-type pin is used for holding/linking the extension tube and the adjusting tube together.

DISCONTINUED and REPLACED with the Go Max Mobile Vertical Dent Pulling Vacuum Tower The Airopower mini tower has a 5-ton capacity and is used with...

With single adapter to allow swivel.  

Attach to cylinder for two way extension.

The Airopower knock pin is used for holding clamps, pins, and adapters in place.

This is a non-threaded adapter to be used with your accessories. Please note, this adapter has to be purchased separately as it is not included in ...

Fits to multiclamp and grooved foot for swivel operation.

Attach to cylinder to connect adjusting pipe.

This is a non-threaded adapter to be used with your accessories. Please note, this adapter has to be purchased separately as it is not included in ...

Allows application to different angles.

Fits to flanged edge of the car trunk Fits to narrow edge of the car roof Fits to narrow side of the sill panel

The Airopower male connector can be attached to the rear connector of the Airopower ram as an extension or a connector. It is used to connect attac...

The Airopower female connector can be attached to the front (piston) of the Airopower ram as an extension or a connector. It is used to connect att...

The Airopower serrated saddle is used to push flat areas on the vehicle.

The Airopower flat base is used in big and flat areas of the vehicle like the trunk, hood, and engine compartment.

The Airopower collar toe is used together with the plunger toe for pushing and pulling vehicle parts like the door space.

The Airopower plunger toe is used together with the collar toe for pushing and pulling vehicle parts like the door space.

The Airopower v-base is used on hard areas of the vehicle like the engine support, front rails, and pillars.

The Airopower wedge head is used for pointed areas, bars, and corners.

The Airopower pull hook is used with the 2 meters chain and is used for chain pulls.