Drills & Drill Bits

For spot weld removal on ultra high strength steels (UHSS). Technical Data: Packing unit: 1 pc. Dimension: 44 mm Diameter: 8 mm Specifics: Suitabl...

The DF-1480 bit is our 8.0 mm or approximately 5/16th of an inch High Speed Steel Cobalt (HSCO) spot-weld bit. The twist is the same size as the sh...

The DF-1667 Boron Killer is designed specifically for drilling through Boron Steel. This 8.0mm drill bit, made of Tungsten Carbide and with a speci...

Required by: Acura, Audi, BMW, Honda, Porsche, VW To remove spot-welds: for all kinds of body panels, the perfect drill bit. Delivery Contents: 1...

Suitable for high strength and ultra high strength steel (UHSS). Technical Data: Packing unit: 1 pc. Dimension: 44 mm Diameter: 6 mm Specifics: Su...

Standard drill bit for mild steel with TIN coating for extended life time. Features: Coating: TIN-Gold Cutting edge: 2 Application: Steel Speed: 8...

The DF-SPD66A cup and screw attaches to the end of the C-Clamp of the DF-15DX Spot Weld Drill Series to protect the c-clamp.

The DF-1465 bit is our 6.5mm or approximately 1/4-inch High Speed Steel Cobalt (HSCO) spot weld bit. The twist is smaller than the shank which is 8...

Features: Finish: TIN gold plated Cutting Edge: 2 Application: Steel Speed: 800 - 1000 rpm Technical Data: Packing unit: 1 pc. Material: HSS TiN...

For spot weld removal on high strength steels. Technical Data: Packing unit: 1 pc. Dimension: 44 mm Diameter: 8 mm Material: HSS plated Specifics:...

For spot weld removal on ultra high strength steels (UHSS). Technical Data: Packing unit: 1 pc. Diameter: 10 mm Material: HSS, VHM Dimension: 44 m...

Required by: Acura, Aston Martin, Audi, Bentley, BMW, Honda, JLR, Porsche, VW Spot weld remover; universal for all cars. Especially designed for ...

Required by GM and Porsche. 100° countersink with depth stop and pilot for precise countersinking of holes when using screws and rivets. Delivery C...

The DF-1680TC Titanium Carbon Nitride (TiCN) coating on this bit will lower friction and keep the edge sharp longer than regular drill bits. The tw...

The DF-1780 is specifically designed for the rigours of spot weld drilling, these Germany made bits can be used with any 3/8-inch drill. Also avail...

Special drill for Mercedes rivet process preparation. Technical Data: Packing unit: 1 pc. Dimension: 70 mm Diameter: 6.7 mm Material: VH Metal Sp...

Features: Standard drill bit for mild steel Coating: vaporized Cutting edge: 2 Application: Steel Speed: 800 - 1000 rpm Technical Data: Packing ...

To remove self piercing rivets. It is made out of tungsten-carbide (extra strong). The VAS version (VAS 6768) can be purchased via SNAP-ON.

The DF-1610TC Titanium Carbon Nitride (TiCN) coating on this bit will lower friction and keep the edge sharp longer than regular drill bits. The tw...

The DF-1610 bit is our 10.0mm and the largest diameter High Speed Steel Cobalt (HSCO) spot-weld bit we offer. The twist is larger than the shank wh...

The DF-1610T Titanium coating on this bit will help prevent the bit from dulling due to overheating. The twist is the same size as the shank which ...

The DF-1680T is our most popular spot weld drill bit. 8.0mm or 5/16th is the most common size of spot welds that need to be removed. The Titanium c...

Pilot for precise positioning when countersinking holes in combination with the 120° countersink.

OVERVIEW FEATURES & SPECS IN THE BOX DOCS Tool WarrantyThe tool has a 5-year Limited Warranty  The M18 FUEL™ 1/2" Hammer Drill Dr...

OVERVIEW FEATURES & SPECS IN THE BOX DOCS Tool & Battery WarrantyThe tool has a 5-year Warranty & a 3-year battery warran...

Large 3" C-Clamp (DF-SPD48L) for the DF-15DX Spot Weld Drill (Sold separately). Same C-Clamp that is included in the DF-15DX Kit.

Meets the requirements of Aston Martin Features: 3/8" capacity geared pistol grip drill Heavy duty and the best selling model of the drills Precis...

Why throw out dull, dirty and expensive drill bits? Why not make them like new again! Introducing the Pro Spot PR1000 Spot Weld Drill Re-Sharpener...

For Countersink 100° with depth stop and pilot | 617241 Upgrade/repair your countersink with the Replacement Countersink! Don't struggle with makes...

For Countersink 120° with depth stop and pilot | 617240 Upgrade/repair your countersink with the Replacement Countersink! Don't struggle with makes...

Introducing the Tesla Countersink Kit, the ultimate solution for precise and efficient countersinking in a Tesla vehicle. The Tesla Countersink Kit...

Special drill bit for Mercedes rivet process preparation. Technical Data: Packing unit: 1 pc. Diameter: 14 mm / 11 mm (inside) Delivery Contents...

Precise drill for rivet preparation. Technical Data: Packing unit: 1 pc. Dimension: 70 mm Diameter: 6.5 mm Specifics: Suitable for Vario Drill Mat...

Precise drill for rivet preparation. Technical Data: Packing unit: 1 pc. Dimension: 70 mm Diameter: 4.8 mm Specifics: Suitable for Vario Drill Mat...

Features: Finish: TIN gold plated Cutting Edge: 2 Application: Steel Speed: 800 - 1000 rpm Technical Data: Packing unit: 1 pc. Material: HSS TiN...

Features: Finish: TIN gold plated Cutting edge: 2 Application: Steel Speed: 800 - 1000 rpm Technical Data: Packing unit: 1 pc. Material: TIN coa...

The DF-1780T is specifically designed for the rigours of spot weld drilling, these Germany made bits can be used with any 3/8-inch drill. Centring ...

Wielander + Schill's WS90 Jumbomatic for vario drill WS90. Technical Data: Packing unit: 1 pc. Material: Steel Opening depth: 85 mm Opening width:...

To "dress" aluminum welds. Technical Data: Packing unit: 1 pc. Dimension: 70 mm Diameter: 6 mm (shaft) Material: Carbide

To "dress" aluminum welds. Technical Data: Packing unit: 1 pc. Diameter: 6 mm (shaft) Material: Carbide Specifics: Spherical shape Ø 12 mm Dimensi...

To "dress" aluminum welds. Technical Data: Packing unit: 1 pc. Diameter: 6 mm (shaft) Dimension: 65 mm Material: Carbide Specifics: Cylindrical wi...

To "dress" welded areas. Technical Data: Packing unit: 1 pc. Dimension: 70 mm Diameter: 6 mm (shaft) Material: Carbide Specifics: Large conical sh...

To "dress" welded areas. Technical Data: Packing unit: 1 pc. Material: Carbide Dimension: 50 mm Specifics: Spherical shape Diameter: 12 mm / 6 mm ...

To "dress" welded areas. Technical Data: Packing unit: 1 pc. Diameter: 6 mm (shaft) Material: Carbide Specifics: Small conical shape Dimension: 6...

Features: Function no 1: to mark the rivets at the top side of the rivet Function no 2: to mark the rivet at the bottom side of the rivet The spec...

Technical Data: Packing unit: 1 pc. Diameter: 8 mm Dimension: 70 mm Material: UHSS