Dent Fix Equipment

The Parking Sensor and Lens Hole Maker (Part No. DF-EZ10) from Dent Fix Equipment is the precise and clean way to create holes in order to install...

Our nine-fingered claw, the DF-506, is designed for heavier panels and pulls that may require a slide hammer or power post. The pulling finger desi...

The Grounding Magnet DF-GM makes grounding and connecting to your system's ground cable effortless and reliable, with 350 AMP pull. Its powerful ma...

The DF-503T trigger switch is a replacement part for the Dent Fix Maxi DF-505/220V or Hammerhead DF-595ii. Includes one (1) piece.

Squeeze-Type Resistance Spot Welding (STRSW) sometimes require additional measures, in the form of shunting the current flow, to create a successf...

The DF-3TC3A Telescopic Measuring tram is great for writing estimates or to quickly spot check a frame pull. No need to set up a complicated bench ...

Product Details Do you have the Dent Fix EZ Punch & Lens Hole Maker (DF-EZ10) but want to upgrade to the XL punch sizes? The EZ Punch & Len...

For Rocker Panels or other similar tasks. DF-507TK: 1Lb thick Wiggle Wire (3/32") .93mm, 12 gauge, approx 30 pieces. Made in the USA.

Product Details The DF-SG70 has an ergonomic handle, disengage button, and large rubber suction pad. Produces suction or vacuum that locks in place...

The DF-MP050K is the ultimate hole punch kit provides the power and versatility to get any job done. The unique design of the cutter shears the met...

The DF-504 Four Finger Bear Claw is ideal for hand pulling creases across a door. Used in combination with wiggle wire that is welded to the panel,...

Re-create fender curve lines perfectly every time with the DF-BL10A. Makes accurate measurements around wheel opening mouldings quickly and easily.

Features Rubber tip provides a concentrated stream of air Perfect air tool for removing loose materials from crevasses and tight spaces Includes c...

Discontinued and replaced with DF-BG603 Product Description The DF-BG601 Venturi Blow Gun from Dent Fix Equipment were designed to meet the safety...

The DF-1480 bit is our 8.0 mm or approximately 5/16th of an inch High Speed Steel Cobalt (HSCO) spot-weld bit. The twist is the same size as the sh...

The DF-1667 Boron Killer is designed specifically for drilling through Boron Steel. This 8.0mm drill bit, made of Tungsten Carbide and with a speci...

Deluxe Knockdown Tool Kit (DF-KDTE) from Dent Fix Equipment is the perfect tool to use when knocking down high spots on PDR or GPR repairs. Select ...

Product Details Achieve a clean, OEM look every time with the DF-EZ10XL EZ Hole Punch & Lens Hole Maker XL, for quick and precise results. Get...

The DF-WG1 Welding Ground out performs standard magnetic ground block. It is the perfect upgrade for the MAXI Steel Dent Pulling Station but the un...

The DF-3TC5A Telescopic Measuring Tram is great for writing estimates or to quickly spot check a frame pull. No need to set up a complicated bench ...

Taking point-to-point measurements from 1'4" to 11'11" (400-3640 mm) the DF-3DX Digital Tram Gauge user can measure in feet, inches, 1/16ths of an...

The DF-SPD66A cup and screw attaches to the end of the C-Clamp of the DF-15DX Spot Weld Drill Series to protect the c-clamp.

The DF-1465 bit is our 6.5mm or approximately 1/4-inch High Speed Steel Cobalt (HSCO) spot weld bit. The twist is smaller than the shank which is 8...

Product Description: Professional PDR nib assortment designed for glue-pull paintless dent repair workflows in automotive and collision repair. Thi...

The Cold Adhesive Glue Slide Hammer Set DF-CGS71 is a lightweight kit that is a great way for auto body professionals to quickly and safely move la...

MAXI-MIZE your steel panel repairs with the special MAXI EX configuration! APPLICATION:Efficiently repairs light to moderate collision damage on au...

For crease pulling and other similar tasks. DF-507: 1 Lb thin Wiggle Wire .062, 1/16", 16 gauge, approx 60 pieces. Made in the USA.

Male extraction die for self piercing riveter.

Dent Fix 350mm (DF-118) replacement pointer for DF-3, and DF-3S Tram Gauges.

Dent Fix 110mm (DF-302) replacement pointer for DF-3DX, DF-3TC5A, and DF-3TC3A Tram Gauges.

The DF-1680TC Titanium Carbon Nitride (TiCN) coating on this bit will lower friction and keep the edge sharp longer than regular drill bits. The tw...

Product Description: The Dent Fix 700mm Pointer (DF-309) is a measurement accessory designed for use with tram gauge systems to accurately referenc...

Product Description: Replacement glue sticks for glue gun. Glue used to attach pulling tabs for paintless dent repair (PDR). The DF-HS10 red colore...

Product Description: The Dent Fix SPR Die Set – 5.3 mm B1 + B2 is a precision replacement die pair engineered for professional self-piercing rivet ...

Product Description: Accessory electrode designed to expand the capabilities of the Dent Fix DF-505 Maxi Dent Pulling Station for advanced struct...

Product Description: Professional slide hammer designed for paintless dent repair (PDR) workflows using PDR nibs and glue tabs to pull dents and di...

Mammoth Tar Black Cold Glue DF-CGBT is great for quickly and safely moving large areas of metal. Mammoth Tar Black Cold Glue adhesive is applied in...

FLYER | MANUAL | EMITTER PIN REPLACEMENT | BATTERY REMOVAL | FILTER REPLACEMENT The StaticZap (DF-EZAP) is an essential tool for maintaining pristi...

A heavy-duty GPR glue puller kit that is in a league of its own!The DF-GPX Glue Puller Extreme will perform repairs on major panel damage with a m...

The 33 piece DF-PDRKIT33 is the bundle of tools that will make the job easy. This paint-less dent repair kit contains an essential gathering of 33 ...

The DF-505CH is the replacement cable and handle for the MAXI weld unit on the DF-505/220V, DF-505/110V, and DF-505/DXE Steel Pulling systems.

3.3 mm SPR die set A1 + A2 for self piercing riveter.