Dent Fix Drilling & Cutting Tools

The Original Spitznagel DF-15DX Spot Weld Drill that applies the cutting pressure pneumatically. You do not have to push on the drill bit. Our pat...

Mega 6" C-Clamp (DF-SPD48M) for the DF-15DX Spot Weld Drill (Sold separately). Allows the drill bit to access deeper parts of the panel.

The DF-1690 Boron® Killer spot weld bit is best used with the original Spot Annihilator DF-15DX with its patented Predator Approach prevents slammi...

The DF-SPD66A cup and screw attaches to the end of the C-Clamp of the DF-15DX Spot Weld Drill Series to protect the c-clamp.

The DF-1465 bit is our 6.5mm or approximately 1/4-inch High Speed Steel Cobalt (HSCO) spot weld bit. The twist is smaller than the shank which is 8...

The DF-1480 bit is our 8.0 mm or approximately 5/16th of an inch High Speed Steel Cobalt (HSCO) spot-weld bit. The twist is the same size as the sh...

The DF-1780 is specifically designed for the rigours of spot weld drilling, these Germany made bits can be used with any 3/8-inch drill. Also avail...

The DF-1610 bit is our 10.0mm and the largest diameter High Speed Steel Cobalt (HSCO) spot-weld bit we offer. The twist is larger than the shank wh...

The DF-1680TC Titanium Carbon Nitride (TiCN) coating on this bit will lower friction and keep the edge sharp longer than regular drill bits. The tw...

The DF-1610TC Titanium Carbon Nitride (TiCN) coating on this bit will lower friction and keep the edge sharp longer than regular drill bits. The tw...

The DF-1680T is our most popular spot weld drill bit. 8.0mm or 5/16th is the most common size of spot welds that need to be removed. The Titanium c...

The DF-1780T is specifically designed for the rigours of spot weld drilling, these Germany made bits can be used with any 3/8-inch drill. Centring ...

The DF-1610T Titanium coating on this bit will help prevent the bit from dulling due to overheating. The twist is the same size as the shank which ...