Kit includes:

1 AGRK-18V-HZ-LI-SYS Diablo Reciprocating Cut-Out Tool
1 AGKB3X14 3" x 14" SDS Blade for Diablo Tool
1 AGCG-18V-LI Milwaukee 18V LI Urethane Gun
1 AGCG-SP-20OZ-M Milwaukee Caulking Gun 20 OZ Sausage Pack Conversion Kit
1 SRSYS-SAV Glass Saver Glass Scratch Removal System
1 PRO1HDD Lil Buddy Auto Glass Single Person Setting Tool
1 AGWCS3 FINAL CUT WIRE CUTTING SYSTEM
1 AGSC-SG-2PK SUPER GRIP SUCTION CUP -  2PK
1 LKQTR GT Tools® Quarter Cutter™ Long Knife
1 LKQTR1 GT Tools® Shorter Cutter™ Long Knife
2 AGKBS1.5X10 1.5" x 10" Standard Sheath Blade
1 AGS2 Auto Glass Rack - 9 Slot
1 AGMC AUTO GLASS MOLDING CUTTER
1 DCT5 DOOR AND COWLING REMOVAL TOOLS
1 HT4 DOUBLE BEND RUBBER HOOK TOOL
1 HT5 LONG DOUBLE BEND RUBBER HOOK TOOL
1 PRT5 PANEL REMOVAL TOOLS
1 AGUNC URETHANE NOTCH CUTTER..
1 AGFMRT AUTO GLASS FORD MIRROR REMOVAL TOOL
1 AGHPS AUTO GLASS HOOK/PICK SET
1 AGLKA-18IN ALUMINUM LONG KNIFE 18"
1 AGLST1 CURVED HANDLE LOCKING STRIP TOOL
1 AGMR3 AUTO GLASS MOLDING RELEASE TOOL
1 AGPK-A-M WINDSHIELD REMOVAL COLD KNIFE - MEDIUM HANDLE
1 AGPKBGT-1IN GT TOOLS STANDARD PULL KNIFE BLADE 1 INCH 5 PK
1 AGPKBGT-.75IN GT TOOLS STANDARD PULL KNIFE BLADE .75 INCH 5 PK
1 AGPKBGT-1.5IN GT TOOLS STANDARD PULL KNIFE BLADE 1.5 INCH 5 PK
1 AGPWS-RZR AUTO GLASS PINCHWELD SCRAPER RAZOR TOOL
1 AGPWSB-RZR-.50 AUTO GLASS PINCHWELD SCRAPER RAZOR BLADE, .5 INCH 10 PACK
1 AGPWSB-RZR-.625 AUTO GLASS PINCHWELD SCRAPER RAZOR BLADE, .625 INCH 10 PACK
1 AGPWSB-RZR-.75 AUTO GLASS PINCHWELD SCRAPER RAZOR BLADE .75" 10 PACK
1 AGRT AUTO GLASS ROPE-IN TOOL
1 AGWHH AUTO GLASS WIRE HANDLE
1 AGWT4 UNIVERSAL BOLT ON WINDSHIELD WIPER PULLER.
1 HT1 NARROW NOSE TOOL
1 PRT PANEL REMOVAL TOOL
1 RGT2 RUBBER GASKET TOOL WITH BALL END
1 AGS 500 LB WINDSHIELD STAND
1 GTCCS GT Tools Cowling Clip Set
10 AGPWSB-RZR-W.75 Winged Scraper Blades
1 GTME0066 3" x 300 ft Orange Marcy Moulding Tape
12 AGCS AUTO GLASS CHISEL STICK

Step 1: Prepare the Work Area

Ensure the vehicle is parked on a flat surface and that the windshield is clean.
Place the 9-slot Glass Rack nearby for safe storage of the removed windshield.


Step 2: Secure the Windshield

Attach the Super Grip Suction Cups to keep the glass steady.
Use the Auto Glass Molding Cutter to carefully separate the trim.


Step 3: Cut Through the Urethane

Use the Diablo Reciprocating Cut-Out Tool and FinalCut Wire Cutting System to slice through the adhesive with precision.

Step 4: Remove the Windshield

Lift the windshield using the Lil Buddy Single-Person Setting Tool for controlled removal.
Store the glass safely on the Auto Glass Rack to prevent damage.


Step 5: Prepare for Installation

Use the Pinchweld Scraper Razor Tool to remove any old adhesive.
Clean the surface thoroughly before applying new adhesive.


Step 6: Install the New Windshield

Apply fresh urethane using the Milwaukee 18V LI Urethane Gun.
Carefully set the new windshield in place and allow it to cure properly.

1. Wear Safety Gear – Use gloves and goggles to protect against glass and adhesives.
2. Secure Work Area – Stabilize the vehicle and clear the space.
3. Handle Glass Carefully – Use suction cups to prevent drops.
4. Use Tools Properly – Follow instructions, especially for power tools.
5. Beware of Sharp Edges – Handle knives and scrapers with care.
6. Avoid Excessive Force – Prevent damage by working steadily.
7. Ensure Ventilation – Avoid inhaling adhesive fumes.
8. Dispose Responsibly – Discard glass and blades safely.
9. Keep Tools Secure – Store away from children.
10. Follow Manufacturer Guidelines – Adhere to GT Tools® instructions for safe use