Pro Spot Canada

The Honda ProFirst Certification Program previously required the DS980J Welding Wire. Due to lack of availability of the wire, Honda re-tested and ...

Contact Tip for Steel/Silicon Bronze 0.8mm (0.030 in.)MIG welding contact tip to be used for steel and silicon bronze (green and orange) Pro Spot w...

Gas nozzle for steel and silicon bronze (green and orange) Pro Spot welding torches. It can also be used for the Spanesi Q5.2 Inverter welding torch.

Manual | Brochure Introducing the NEW IONSTAR Anti-Static Gun, the most effective tool that helps painters get the cleanest paint job possible. It...

Graphite liner for use with aluminum (blue) Pro Spot welding torch.

Contact Tip for Aluminum Wire 1.2mm (0.045 in.)To be used for aluminum (blue) Pro Spot welding torch and Spanesi Q5.2 Inverter welding torch. M8 Th...

Aluminum hand tool kit developed for Ford paint and body repair. Kit Contents: Dynabrade File Belt Sander, 85-9001 x 1 Dynabrade - Assorted Cerami...

i5 Smart Spot Welder Weld Caps A, Female, 5RW, Pack of 15.

M4x16mm Aluminum Weld Stud (Pack of 500).

5mm SPR (Self Piercing River) holder with large magnet for PR-5 riveter.

Silicon bronze MIG welding wire spool. 0.8 mm / 0.030 in diameter 8 in spool 2 kg NOTE: See 311070 for 5kg roll

Pro Spot PS-025/15 Female Weld Cap is designed to work with i4s, i4, PHS-101, and PR-2000 spot welders. This cap features a 4RW taper, making it a ...

Contact Tip for Steel/Silicon Bronze 0.6mm (0.023 in.)MIG welding contact tip to be used for steel and silicon bronze (green and orange) Pro Spot w...

Liner for Pro Spot MIG welders; SP-5.3, SP-5 DP, and SP-2 to be used for steel or silicon bronze torches. Ensure the liner thickness matches the wi...

5 mm heavy duty male rivet removal dies for PR-5 riveter.

Spot Hammer Tip (8mm thread, 5-pack) for i4s Smart Spot Welder. Pack of 5.

3 mm rivet removal dies for PR-5 riveter.

Meets the requirements of: Ford, GM (Buick, Cadillac, Chevrolet, and GMC), Jaguar Land Rover (JLR, for 5000 series aluminum) Subaru, and VinFast. A...

Ergonomic MIG Torch configured for Steel Welding on Pro Spot MIG Welders. Part Number: 82-7016.

Ergonomic MIG Torch configured for Silicon Bronze. Part Number: 82-7015.

Torch Neck for plus 15 - Gas Diffuser Spring (50-7152) included.

Brochure Pro Spot's VAC-U-PULL-L Mobile Dent Pulling Tower (56") is an innovative and powerful solution for fixing dents anywhere. This state-of-t...

3 mm SPR (Self Piercing River) holder for PR-5 riveter.

Brochure | Component List | Instructions All-In-One Tool for Quick and Quality Glass Repairs. The Windshield Repair Kit (PRO-WRK) is a new, easy t...

Stainless Steel Brush, Pack of 3 Part Number: 50-0580-3PK

Meets the requirements of: GM (Buick, Cadillac, Chevrolet, and GMC), Jaguar Land Rover (JLR), Subaru, and VinFast. Mild steel MIG welding wire ER70...

Gas Diffuser for 1.4 Plus 15 Torch to be used for steel and silicon bronze (green and orange) Pro Spot welding torches. It can also be used for the...

Pro Spot gas diffuser spring to be used with gas diffuser (50-7151). It can also be used for the Spanesi Q5.2 Inverter welding torch.

Carbon electrode for single sided welding.

Mount the Pro Spot Dust Extraction System on any shop wall. The Pro Spot Wall Mount Kit allows pivoting action and easy on/off docking.

Required: Audi, Bentley, and GM (Buick, Cadillac, Chevrolet, and GMC). The Gas Regulator for Pro-Spot MIG Welders (82-7001) is a reliable and easy-...

Aluminum Pulling Eye/Pull Key. Features Pack of 12 Reusable Thread on to aluminum studs to pull dents from aluminum panels

5mm Contact Tip (5 Pk) for Weld-on Shafts, PR-3 Pack of 5.

5mm SPR (Self Piercing River) holder with small magnet for PR-5 riveter.

2.9 - 4.1 mm forming dies for PR-5 riveter.

Features: Auto-Darkening Lightweight (1.04 lbs) Comfortable Ergonomic

Please be sure that the liner thickness matches that of the wire you are planning to use.

Included in Shank Assembly: 3/4 Nylon Flat Washer | 52-9029 Water Cooled Shank | 90-0416 Wheel House Washer | PS-1135 M6 x 16 SHCS | S-103

Ergonomic MIG Torch configured for Aluminum Welding. Part Number: 82-7025.

Wire Feed Roller for Steel Size : 0.8mm - 1.0mm (0.031 - 0.039 in.). Two rollers are required and the listed price is for each.

Gas nozzle for aluminum (blue) Pro Spot welding torch.

Gas Diffuser M8 for Plus 25 Torch to be used for aluminum (blue) Pro Spot welding torch.

Contact Tip for Aluminum Wire 1.0mm (0.040 in.)To be used for aluminum (blue) Pro Spot welding torch and Spanesi Q5.2 Inverter welding torch. M8 Th...

Aluminum MIG welding wire for Pro Spot MIG welders; SP-1, SP-2, SP-5 DP, SP-5.3 and Wielander+Schill IP7-2 ACT welder. The 4043 wire produces high ...

OEM Approvals | Component List | Brochure Pro Spot's PR-5D Rivet Gun System applies & removes rivets as a cold joining process on heat sensiti...

Description: The Pro Spot 82-7018 Ground Cable with Connector is a replacement for the ground on your SP-1/SP-2/PR-220MV MIG Welders. For the SP-5...

The Pro Spot CLP-110 weld-on shaft dent pulling kit is designed for use with Pro Spot dent repair stations. This essential consumable accessory ena...

Instruction Product Description: Maintain optimal vacuum performance with the Pro Spot Floor Gasket Seal (Part #84-0501), specifically designed fo...