Products

1 set of A3 removal dies for 5.3mm self piercing rivets.

A4 rivet extraction mandrel includes PU spring for Self Piercing Rivets and Solid Rivets. Technical Data: Material: Steel Packing unit: 1 pc. Spe...

The pressing out spike A5 was specially designed for the removal of hollow self-pierce rivets.Previously, the hollow self-pierce rivet were removed...

ABS Plastic Round Rod, 1/8” - Black 1/2 lb for Nitrogen Plastic Welder.

Tested and approved by; Jaguar Land Rover, Ford, Toyota, Lexus, Tesla, and Nio. Recommended by; BMW, MINI, and Rolls-Royce. Features: The WPS 200...

Designed in accordance to health and safety regulations: when noise level and vibrations are an important issue, low vibration < 2,5 m/s2 (accor...

Use the Airopower Standard Kit and add the Airopower 19 to cover a large range of repair applications. Repairs that can be done with this kit inclu...

Use the Airopower Standard Kit and add the Airopower 33 to cover a larger range of repair applications. Easily store the Airopower system and acce...

This is a 53 piece Accessory Kit ONLY. The Airopower Standard Kit needs to be purchased separately.   The Mini Frame Machine Don't buy another fra...

Use the Airopower Standard Kit and add the Airopower 9 to cover more range of repair applications. Repairs that can be done with this kit includes ...

Angles are adjustable using an Allen key Useful to push and pull various points on the vehicle. It can be used in trunks and on frame railings

Used for pulling keys with the Airopower Standard Kit. Please see pictures.

170mm Airopower adjusting tube.

290mm Airopower adjusting tube.

Used to connect the Airopower Chains.

2 chains, each 2 meters in length.

Clamp for push and pull Fits to flanged edge of car trunk Fits to narrow edge of car roof  

To push and pull wide areas from an angle Can also be used to push and pull corners

The airopower deluxe trolley is specially designed to store the airopower system. A standard kit fits on the top shelf and all the airopower access...

125mm Airopower extension tube.

170mm Airopower extension tube.

300mm Airopower extension tube.

500mm Airopower extension tube.

Comes as a set of 2.

The grooved rubber prevents the panel edge from damage.

The Airopower knock pin is used for holding clamps, pins, and adapters in place.

The Airopower L-type pin is used for holding/linking the extension tube and the adjusting tube together.

The Airopower mini tower has a 5 ton capacity and is used with existing floor pots. See pictures for an example.

With single adapter to allow swivel.  

Attach to cylinder for two way extension.

This is a non-threaded adapter to be used with your accessories. Please note, this adapter has to be purchased separately as it is not included in ...

Fits to multiclamp and grooved foot for swivel operation.

AIROPOWER BROCHURE Airopower is a pneumatic 5.25 tons push and pull ram that eliminates the problems of leaking porta powers yet is far more versa...

Attach to cylinder to connect adjusting pipe.

This is a non-threaded adapter to be used with your accessories. Please note, this adapter has to be purchased separately as it is not included in ...

Allows application to different angles.

Fits to flanged edge of the car trunk Fits to narrow edge of the car roof Fits to narrow side of the sill panel

Technical Data: Diameter: 1.2 mm Specifics: D200 roll Packing unit: 2 kg Material: AlMg3

Technical Data: Specifics: D-200 roll Packing unit: 2 kg Material: AlMg5 Diameter: 1.2 mm

Welding wire on D-200 plastic roll is made of aluminum-magnesium alloy for TIG or MIG welding of aluminum alloys. Applicable shielding gases (EN ...

Welding wire on D-200 plastic roll made of aluminum-silicon alloy (aluminum cast alloys) for TIG or MIG welding of aluminum-silicon alloys. Appli...

Welding wire on D-200 plastic roll is made of aluminum-silicon alloy (aluminum cast alloys) for TIG or MIG welding of aluminum-silicon alloys. Ap...

Technical Data: Packing unit: 1 pc. Diameter: 1.0 mm Material: AlSi5 Specifics: D200 roll

Welding wire on D-200 plastic roller made of aluminum-silicon alloy for TIG or MIG welding of aluminum-silicon alloys. Technical Data: Diameter:...

Aluminum MIG welding wire for Pro Spot MIG welders; SP-1, SP-2, SP-5 DP, SP-5.3 and Wielander+Schill IP7-2 ACT welder. The 4043 wire produces high ...

Aluminum MIG welding wire for Pro Spot MIG welders; SP-1, SP-2, SP-5 DP, SP-5.3 and Wielander+Schill IP7-2 ACT welder. The 4043 wire produces high ...

Aluminum MIG welding wire for Pro Spot MIG welders; SP-1, SP-2, SP-5 DP, SP-5.3 and Wielander+Schill IP7-2 ACT welder. The 5356 wire provides a muc...