Celette

Celette pulling straps used for pulling B-pillars and rails in a safe manner to avoid damages.

Additional modular crossmember for Celette frame machines.

The cage nuts are found inside the crossmembers and can be easily replaced. Remove the split pins in the cross members and then slide out the trays...

CAMELEON CATALOGUE Cameleon Premium: CAM02.162, the Cameleon Premium comes with all accessories needed to fix a damaged car. This is a stand-alone ...

Celette offers this handlebar, which can be placed in any position around the bench, to enable the bench to be moved easily around your auto body s...

Set of 2 wedges.Part Number: TV.410

The double-holding device holds and controls door openings during repairs. The Celette Mechanical Double Holding Door Brace helps maintain the corr...

The Griffon 2.8T Evolution Double Drilled is 4.35m/14’3” long and has a lifting capacity of 2800kg/6172lbs. It features a centre lift for loading o...

The Griffon 2.8T Evolution VB is 4.35m/14’3” long and has a capacity of 2800kg/6172lbs. It features a centre lift for loading on to fixtures or Ca...

The Griffon XL is 5.8m/19’0” long and has a lifting capacity of 4200kg/9260lbs. It has a front lift to lift the front of the bench up and down for...

This Cellete kit is an axle used between the pulling flange ATD.149 and the MZ system to reposition the strut tower correctly. Delivery Contents: ...

A set of 6 Mercedes Benz aluminum crossmembers including bolts and nuts for attaching to the bench.

A pair of Mercedes Benz front cross members including bolts and nuts for attaching to the bench. Required for many Mercedes Benz set ups due to the...

A set of universal pistons for use with the newer 500 series dedicated jigs. MZ plus is also required for the Cameleon universal fixture sets. Come...

The Celette Naja 3D electronic measuring system is one of the worlds most advanced and user-friendly measuring system in this industry. It is a si...

Nut for crossmembers.Part Number: 911603.

The Celette orientable engine holding device is used to hold the engine in place when dropping the engine cradle. It allows the height of engine to...

Gantry set required to use dedicated side and upper body jigs. Also required to use Cameleon side and upper body universal kit CAM04.032.

Pin and wire for MZ Towers.Part Number: B70.

This hook is attached to a chain pulley and is used to give additional pulling angle. It allows multiple pulling angles anywhere around the frame b...

The Celette pulling clamp is a medium size automatic clamp with no bolting needed, as the jaws self tighten during the pulling.

The Celette pulling flange makes the body repair work around and on the suspension strut tower is made considerably easier.

The Rhone L 4.2T is 5.0m/16’5” long and has a lifting capacity of 4200kg/9259lbs. It has an under lift that allows you to raise and lower the benc...

The Rhone L 4.2T is 5.0M/16’5” long and has a capacity of 4200kg/9259lbs. It has an under lift that allows you to raise and lower the bench to a c...

The Rhone XL 5.5T is a 6m/19’7” extra-long drive-on bench with a double scissor lift and has a capacity of 5500kg/12125lbs. The unique feature of ...

Bolt to fix MZ Tower to TV400 plate.Part Number: 955753

Bolt to fix MZ Tower directly to Crossmember.Part Number: 955750.

Bolt to fix MZ Tower to Crossmember through TV400 plate.Part Number: 955751.

Bolt for Crossmember.Part Number: 955713.

A set of 22 MZ towers for use with dedicated fixtures and Cameleon. Includes mobile storage trolley and one set of TV410 plates. Parts Included: MZ...

Sevenne is a universal mobile bench, which can be upgraded to Rhone or Griffon. The anchoring can be achieved all around the bench, thanks to its ...

Sevenne XL Composition (5.8M/19’0”). It is the longer version of the Sevenne designed for vehicles like the Mercedes-Benz Sprinter and Jaguar XJ. V...

The Smart Rhone is a multipurpose bench designed to handle all kinds of light, medium, and heavy collision repair. With the quick anchoring featur...

A set of 6 standard aluminum crossmembers including bolts and nuts for attaching to the bench.

Required by Audi, VW, Bentley, BMW, Acura, and Honda The Celette Roll.100 is a heavy-duty trolley designed for moving damaged or disabled vehicles ...

Lifting capacity 2,500KG/5,500lbsLifting height 1300 mm/51 inchesHeight when closed 110 mm/4.3 inchesLength 3.79 m/149 inchesMax pulling force 10 ...

The pulling unit is equipped with 10t pulling forceLifting capacity from the wheels is 3000kg/6600lbs Lifting from the sill clamps is 4000kg/8,800...