Products

2 chains, each 2 meters in length.

Clamp for push and pull Fits to flanged edge of car trunk Fits to narrow edge of car roof  

To push and pull wide areas from an angle Can also be used to push and pull corners

The airopower deluxe trolley is specially designed to store the airopower system. A standard kit fits on the top shelf and all the airopower access...

125mm Airopower extension tube.

170mm Airopower extension tube.

300mm Airopower extension tube.

500mm Airopower extension tube.

Comes as a set of 2.

The grooved rubber prevents the panel edge from damage.

The Airopower knock pin is used for holding clamps, pins, and adapters in place.

The Airopower L-type pin is used for holding/linking the extension tube and the adjusting tube together.

DISCONTINUED and REPLACED with the Go Max Mobile Vertical Dent Pulling Vacuum Tower The Airopower mini tower has a 5-ton capacity and is used with...

With single adapter to allow swivel.  

Attach to cylinder for two way extension.

This is a non-threaded adapter to be used with your accessories. Please note, this adapter has to be purchased separately as it is not included in ...

Fits to multiclamp and grooved foot for swivel operation.

Catalogue | Videos Airopower is a pneumatic 5.25 tons push and pull ram that eliminates the problems of leaking porta powers yet is far more ver...

Product Description Shield your Airopower cart and accessories with the EP-COVER, a custom-fit protective cover that guards against weather, dust,...

Attach to cylinder to connect adjusting pipe.

This is a non-threaded adapter to be used with your accessories. Please note, this adapter has to be purchased separately as it is not included in ...

Allows application to different angles.

Fits to flanged edge of the car trunk Fits to narrow edge of the car roof Fits to narrow side of the sill panel

Technical Data: Diameter: 1.2 mm Specifics: D200 roll Packing unit: 2 kg Material: AlMg3

Technical Data: Specifics: D-200 roll Packing unit: 2 kg Material: AlMg5 Diameter: 1.2 mm

Product Description High-quality AlMg5 alloy welding wire (1.0 mm dia.) on a 2 kg D200 spool. This 5356 welding wire is purpose-built for MIG/MAG...

Welding wire on D-200 plastic roll made of aluminum-silicon alloy (aluminum cast alloys) for TIG or MIG welding of aluminum-silicon alloys. Appli...

Required by Audi, Bentley, and GM (Buick, Cadillac, Chevrolet, and GMC). Welding wire on D-200 plastic roll is made of aluminum-silicon alloy (al...

Technical Data: Packing unit: 1 pc. Diameter: 1.0 mm Material: AlSi5 Specifics: D200 roll

Meets the requirements of: Jaguar Land Rover (JLR, for 6000 series aluminum). Welding wire on D-200 plastic roller made of aluminum-silicon alloy...

Introducing the Alu Pull Kit AK 98 – the ultimate solution for efficient aluminum sheet dent repairs in body and vehicle construction. This advance...

For aluminum and stainless steel torches. Upgrade your welding performance with our premium blue PTFE liner, engineered for aluminum and stainless ...

Aluminum MIG welding wire for Pro Spot MIG welders; SP-1, SP-2, SP-5 DP, SP-5.3 and Wielander+Schill IP7-2 ACT welder. The 4043 wire produces high ...

Aluminum MIG welding wire for Pro Spot MIG welders; SP-1, SP-2, SP-5 DP, SP-5.3 and Wielander+Schill IP7-2 ACT welder. The 4043 wire produces high ...

Aluminum MIG welding wire for Pro Spot MIG welders; SP-1, SP-2, SP-5 DP, SP-5.3 and Wielander+Schill IP7-2 ACT welder. The 5356 wire provides a muc...

Aluminum MIG welding wire for Pro Spot MIG welders; SP-1, SP-2, SP-5 DP, SP-5.3 and Wielander+Schill IP7-2 ACT welder. The 5554 wire provides impro...

Aluminum Pulling Eye/Pull Key. Features Pack of 12 Reusable Thread on to aluminum studs to pull dents from aluminum panels

M4x10mm Aluminum Weld Stud (Pack of 50).

M4x10mm Aluminum Weld Stud (Pack of 500).

M4x16mm Aluminum Weld Stud (Pack of 500).

FLYER | MANUAL | EMITTER PIN REPLACEMENT | BATTERY REMOVAL | FILTER REPLACEMENT The StaticZap (DF-EZAP) is an essential tool for maintaining pristi...

This dual-component manual adhesive applicator gun is great for applying PlastiFix High Performance Adhesive. It can accommodate 200 mL cartridges ...

Flyer • Ideal for protecting wheel and tires from overspray• Set of 4 per package• Up to 15″” capacity• Weight: 2.55lbs.

Parts Breakdown | Flyer Product Description: The Astro Pneumatic MM18 18″ Masking Machine is a shop-ready masking and material dispenser designed ...

Parts Breakdown | Flyer Product Description: The Astro Pneumatic Mobile Step Masking Machine is a versatile masking and prep tool for professional...

Product Description The Astro Pneumatic PRN1 pneumatic rivet nut setting kit is an air-hydraulic tool designed for installing threaded inserts (riv...

Parts Breakdown | Flyer Product Description: The Astro Pneumatic Tree Type Masking Station (Model ASMS2) is a professional mobile masking organize...