Best Sellers

The DF-1780T is specifically designed for the rigours of spot weld drilling, these Germany made bits can be used with any 3/8-inch drill. Centring ...

45º upper electrode for the X-Adapter.

45º lower electrode for the X-Adapter.

Copper shaft for the X-Adapter.  

Technical Data: Packing unit: 10 pcs. Material: Steel Dimensions: 5.6 x 12.6 mm

Technical Data: Packing unit: 10 pcs. Material: Steel Dimensions: 7.4 x 15 mm

Technical Data: Packing unit: 10 pcs. Material: Steel Dimensions: 7.4 x 13.8 mm

Wheelhouse Electrode for i4 Spot Welders | PS-1133-5/8 Diameter is 5/8".

Meets the requirements of: Ford and Jaguar Land Rover. Features: 10mm sanding belt sander Super light & ergonomic design Rubber grip giving co...

The wire insertion tool is an accessory for the Roll Out 2020 CF windshield removal system. The wire insertion tool has been specially designed to ...

For spot weld removal on high strength steels. Technical Data: Packing unit: 5 pcs. Dimension: 44 mm Diameter: 8 mm Material: HSS plated Specifics...

To place self piercing rivets (SPR) + half hollow SPR rivet head size Ø 3.3 - 5.3mm and to remove self piercing rivets (SPR). 9-part riveting tool ...

Contact nozzle made of E-Cu. Suitable for welding torches MB 15, MB 24, MB 25, MB 26, 3G, Force 155, Force 200. Technical Data: Material: Copper W...

For the protection of the spot welding system against dust, dirt, and water. With lateral velcro fastening.

Can be used on the Spot Welder gun side in combination with: C-arm No. 1  for GT Spot Welder C-arm No. 2 for Wheel Arches C-arm No. 3 for GT Spot ...

InvertaSpot GT C-arm No. 2 for Wheel Arches. Electrode B water-cooled. Delivery Contents: 1 x electrode type A 1 x electrode type B

C-arm No.4 with electrode holder and 260mm electrode. Tested and approved by Ford and Hyundai. Recommended by BMW, MINI, Rolls-Royce, Mercedes Benz...

The BMW Powerbird works independently of cables and hoses - guarantees flexibility and speed in the workshop. Scratches on high-quality surfaces ar...

Manufactured in Switzerland, this extruded aluminum tram gauge is lightweight yet remains rigid when fully extended. The telescoping design allows ...

A pair of Mercedes Benz front cross members including bolts and nuts for attaching to the bench. Required for many Mercedes Benz set ups due to the...

2 chains, each 2 meters in length.

Mo-Clamp reintroduced the Tight Opening Clamp because popular demand had to be met, so the old design is back. Still a full 3-ton capacity. Still a...

T5 Setting and Closing die for Self Piercing Rivets (SPR). Included in the Tesla Tool Box RS-11. Tesla Part #: 1045190-00-A, 5 mm SPR Die-KA 075 2113.

Pulling adapter for blind rivet nuts with a 5 mm RivBolt thread for the BRN 50 blind rivet nut adapter. Technical Data: Coating: burnished Con...

Chain too long? Make it shorter! Chain to short? Make it longer! Alloy heat-treated steel. Pulling slots can be used with #0900 Hole Pull Adapters....

Multi-purpose clamp with gator teeth for sure, non-slip pulls on any lip. Use the Lip Grip as a sandwich clamp on quarter panels or floor sections....

Quick tie-down for track systems or back anchoring on frame racks. Lip can be used for pulling damaged areas; varied multiple uses for chain length...

Spring loaded for easy opening. Includes Oval Loop for use with Slip Hook for easy hook-up. For light sheet metal in those tight places. Cross-hatc...

A prime component of a new generation of Mo-Clamps. Smaller and handier, but equipped with the same self-tightening grip you love. Equipped with a ...

Must use accessory for windshield overhanging the pinch-weld at bottom. (4pcs/set).

Precise drill for rivet preparation. Technical Data: Packing unit: 1 pc. Dimension: 70 mm Diameter: 4.8 mm Specifics: Suitable for Vario Drill Mat...

Components List Pro Spot Tesla Die Kit designed for the installation and removal SPRs (self-piercing rivets), Flow Form rivets hole preparation and...

Self-Tightening. Its 1 1/2" (39 mm) throat clearance fits over a flange or frame horn, or around a lip to pull from behind. Original wedge. Origina...

Features: Finish: TIN gold plated Cutting Edge: 2 Application: Steel Speed: 800 - 1000 rpm Technical Data: Packing unit: 1 pc. Material: HSS TiN...

Non Adhesion Paper for FlexiTherm Heating System. Place it directly on patty or filler. Protects the heating pads from sticking or getting dirty. T...

Technical Data: Packing unit: 4 pcs. Diameter: 16 mm Material: Copper-zirconium Specifics: Shape B

Delivery Contents: 2 x electrode cap type B (497079) 2 x electrode cap type H (497020) Technical Data: Packing unit: 4 pcs. Diameter: 16 mm

Technical Data: Packing unit: 4 pcs. Diameter: 16 mm Material: Copper-zirconium Specifics: Shape D

Technical Data: Packing unit: 4 pieces Material: Copper-zirconium Specifics: Shape F

G1 Die for 6mm Hole Punching & Calibration. Included in Mercedes Benz tool box RS-07 and GM tool box RS-10.

B3 Die for Hole Punching & Calibration. Included in Mercedes Benz tool box RS-07.

A1 removal die for 5.2mm self piercing rivets. Included in BMW tool box RS-03.

1 set of C1 + C2 Setting Dies for 6mm Flow-Form Rivets and Counter-Sunk Flow-Form Rivets. Included in Mercedes Benz tool box RS-07 and GM tool box ...

Technical Data: Packing unit: 1 pc. Material: 42CrMo4 Dimensions: 97.5 mm Diameter: 34 mm

The Roll Out 2020 CF (Constant Friction) is the logical and innovative development of the proven Roll Out 2000 car window repair system. Features...

To "dress" welded areas. Technical Data: Packing unit: 1 pc. Dimension: 70 mm Diameter: 6 mm (shaft) Material: Carbide Specifics: Large conical sh...

To "dress" welded areas. Technical Data: Packing unit: 1 pc. Diameter: 6 mm (shaft) Material: Carbide Specifics: Small conical shape Dimension: 6...

Features: Function no 1: to mark the rivets at the top side of the rivet Function no 2: to mark the rivet at the bottom side of the rivet The spec...