Clamps/Pulling

AIROPOWER BROCHURE Airopower is a pneumatic 5.25 tons push and pull ram that eliminates the problems of leaking porta powers yet is far more versa...

This is a 53 piece Accessory Kit ONLY. The Airopower Standard Kit needs to be purchased separately.   The Mini Frame Machine Don't buy another fra...

This is used for hard-to-hold pulls. It's simple to use, just tack weld one of the reusable plates, attach clamp and pull. When finished, break the...

Most commonly used nuts, bolts, washers and clevis pins to repair and restore Mo-Clamp tools. A diagram on the box helps you immediately locate the...

Versatile combinations for quick hook-ups and multiple pulls. 18-inches of ⅜" chain included. Technical Details: Overall Length: 5" (127 mm) Weig...

Has a throat opening of 7 inches to get over, around and behind the damage. Multiple holes allow for various angle pulls. Includes swivel pad. Opti...

For fast hook-ups on cowls, door posts and trunk openings, or to reach into cramped places. Includes #210060 Horizontal Bracket and #210070 Vertica...

The Panel Puller is light and easy to use with a slide hammer or pulling post. Use the Panel Puller on fender openings, deck lids, door posts and o...

Ever get really frustrated when you need a special sized hook and can't find it? Well, here's the newest in that family of holding devices. The Hoo...

Versatile combinations for quick hook-ups and multiple pulls. 18-inches of ⅜" chain included. Technical Details: Overall Length: 25" (635 mm) Wei...

Great for bolting to a frame, unibody rail or to other places to make a secure pull. Each bar has a combination of hole patterns to facilitate bolt...

Restore your vehicle quickly and easily with this ergonomic tool. Designed for functionality, it effectively removes dents for a new and pristine l...

Chain too long? Make it shorter! Chain to short? Make it longer! Alloy heat-treated steel. Pulling slots can be used with #0900 Hole Pull Adapters....

Mo-Clamp 6506 5/16" Frame Chain 6' is manufactured in accordance with the NACM Specification for chain, ASTM Standard A391 and ASTM Standard A413 f...

Multi-purpose clamp with gator teeth for sure, non-slip pulls on any lip. Use the Lip Grip as a sandwich clamp on quarter panels or floor sections....

Versatile combinations for quick hook-ups and multiple pulls. 18-inches of ⅜" chain included. Technical Details: Gripping Surface: 3" wide (76 mm)...

Quick tie-down for track systems or back anchoring on frame racks. Lip can be used for pulling damaged areas; varied multiple uses for chain length...

The Mo-Clamp 6311 Ford "T" Hook with chain is the original shipping tie down for Ford vehicles.Excellent around the frame machine to help hold a fr...

The Mo-Clamp 6313 Ford "T" Hook with Grab Hook is a heavy-duty tie-down perfect for use around the frame machine. It is made of steel and has a zin...

For quick shortening of a ⅜" chain. Another time saving tool. Usually several is a good thing. Technical Details: Overall Length: 8 1/2" (222 mm) ...

Spring loaded for easy opening. Includes Oval Loop for use with Slip Hook for easy hook-up. For light sheet metal in those tight places. Cross-hatc...

A prime component of a new generation of Mo-Clamps. Smaller and handier, but equipped with the same self-tightening grip you love. Equipped with a ...

This hook is attached to a chain pulley and is used to give additional pulling angle. It allows multiple pulling angles anywhere around the frame b...

Bolt to surface for a 90-degree straight pull or use with #4030 3-Way Pull Clamp, pair of #4025 Frame Rack Jaws or #4010 Frame Rack Unibody Clamp. ...

Clamp has recessed pockets to hold bolts stationary for easy tightening. Includes #4043 Oval Loop. Technical Details: Gripping Surface: 4" wide (1...

One pair Frame Rack Dyna-mo jaws with 7" draw bar, one side pull bracket, shackle and oval loop. Raised "ears" to hold bolt in place while tighteni...

Clamp has recessed pockets to hold bolts stationary for easy tightening. Includes #4043 Oval Loop. Technical Details: Gripping Surface: 4" wide (1...

Alloy heat-treated hooks increase pulling options. May be used with #0810 and #0820 Hole Pull Plates to pull, or use in combination with clamps. Se...

Used for the hard-to-hold pulls. Tack weld one of the reusable plates. Attach clamp and pull, break tack weld with a grinding cut-off wheel or cutt...

Mo-Clamp's new design Tight Opening Clamp has all the same gripping dimension requirements as the old design. Redesigned and strengthened with Mo-C...

One of Mo-Clamp's original self-tightening clamps. A must for every body man. 1½" wide bite for aggressive pulling. Original wedge. New angled toot...

Self-Tightening. Its 1 1/2" (39 mm) throat clearance fits over a flange or frame horn, or around a lip to pull from behind. Original wedge. Origina...

Protects area where chain may damage structure. Can be made into a cinch. Technical Details: Overall Length: 30" (762mm) Width: 3" (78mm) Weight:...

It's one of the toughest little clamps Mo-Clamp has ever built.  Both straight pull or right angle with an infinite twist capability. Mo-Grip™ surf...

The Celette pulling clamp is a medium size automatic clamp with no bolting needed, as the jaws self tighten during the pulling.

The Celette pulling flange makes the body repair work around and on the suspension strut tower is made considerably easier.

Celette pulling straps used for pulling B-pillars and rails in a safe manner to avoid damages.

Use the Airopower Standard Kit and add the Airopower 33 to cover a larger range of repair applications. Easily store the Airopower system and acce...

Use the Airopower Standard Kit and add the Airopower 19 to cover a large range of repair applications. Repairs that can be done with this kit inclu...

Use the Airopower Standard Kit and add the Airopower 9 to cover more range of repair applications. Repairs that can be done with this kit includes ...