Products

260 mm Electrode for C-Arm No. 4 GT Spot Welder. Delivery Contents: Includes copper sealing washer Technical Data: Dimension: 260 mm

A1 removal die for 5.2mm self piercing rivets. Included in BMW tool box RS-03.

Designed in accordance to health and safety regulations: when noise level and vibrations are an important issue, low vibration < 2,5 m/s2 (accor...

The Airopower knock pin is used for holding clamps, pins, and adapters in place.

Fits to flanged edge of the car trunk Fits to narrow edge of the car roof Fits to narrow side of the sill panel

Aluminum Pulling Eye/Pull Key. Features Pack of 12 Reusable Thread on to aluminum studs to pull dents from aluminum panels

M4x10mm Aluminum Weld Stud (Pack of 500).

Technical Data: Packing unit: 25 pcs. Diameter: M4 Material: Steel Dimension: 6 x 11 mm

Technical Data: Packing unit: 25 pcs. Material: Steel Diameter: M5 Dimension: 7 x 11.5 mm

Technical Data: Packing unit: 25 pcs. Material: Galvanized Steel Dimension: 6.5 x 12.5 mm

Liner for Pro Spot MIG welders; SP-5.3, SP-5 DP, and SP-2 to be used for steel or silicon bronze torches. Ensure the liner thickness matches the wi...

Special drill for Mercedes rivet process preparation. Technical Data: Packing unit: 1 pc. Dimension: 70 mm Diameter: 6.7 mm Material: VH Metal Sp...

Technical Data: Packing unit: 1 pc. Opening width: 80 mm Opening depth: 120 mm

Width 140mm x depth 240mm including extension piece 93mm. Technical Data: Packing unit: 1 pc. Opening width: 140 mm Opening depth: 240 mm

Please contact us for Special Order. C-Arm No. 5 with curved C-Electrode and 135mm Electrode. Technical Data: Packing unit: 1 pc. Specifics: water...

The cage nuts are found inside the crossmembers and can be easily replaced. Remove the split pins in the cross members and then slide out the trays...

CAMELEON CATALOGUE Cameleon Premium: CAM02.162, the Cameleon Premium comes with all accessories needed to fix a damaged car. This is a stand-alone...

Electrode kit with rocker for special accessibility, e.g. at the wheelbase or side sill. All welding tasks with no accessibility with conventional ...

Currently out of stock, please contact us for Special Order. Electrode caps dressing file for the InvertaSpot GT automatic. See pictures.

Delivery Contents: 1 x 960162 accessory 2 x electrode caps form A 4 x electrode caps form B 2 x electrode caps form E 2 x electrode caps form A-32...

Electrode holder for C-Arm No. 4. The Wielander + Schill GT spot welder electrode holder is a crucial tool for achieving accurate and reliable spo...

Ergonomic MIG Torch configured for Steel Welding. Part Number: 82-7016.

This Multipart Extension for BMW Powerbird includes a 100mm mouthpiece and riveting that is BMW-approved. Its unique design allows it to fit into l...

Technical Data: Packing unit: 10 pcs. Material: Steel Dimensions: 7.4 x 8.0 mm

Technical Data: Packing unit: 10 pcs. Material: Steel Dimensions: 7.4 x 9.2 mm

Currently out of stock, please contact us for Special Order. Use to pull your car on our Universal dolly up on a Chief frame machine. Specialty des...

Doing a full frame restoration? Doing a frame swap? This is the perfect answer for you to keep that frame or vehicle mobile for the entire project....

Gas Diffuser for 1.4 Plus 15 Torch to be used for steel and silicon bronze (green and orange) Pro Spot welding torches. Spring (50-7152) NOT included.

MB 14/15 and Force 155/200 welding torches Technical Data: Packing unit: 1 pc. Material: Chrome Dimension: 54 mm Diameter: 12 mm Specifics: Conic...

The Griffon 2.8T Evolution Double Drilled is 4.35m/14’3” long and has a lifting capacity of 2800kg/6172lbs. It features a centre lift for loading o...

The Griffon 2.8T Evolution VB is 4.35m/14’3” long and has a capacity of 2800kg/6172lbs. It features a centre lift for loading on to fixtures or Ca...

Components List | Specifications | Brochure The i4 Inverter Resistance Spot Welder is designed to handle the difficult to weld materials such as b...

OEM Approvals | Components List | Specifications | Brochure Pro Spot's i5 SMART Spot Welder features a new medium frequency trans-gun capable of d...

The Inductor® Pro-Max Cart (LXR-11) is an accessory for use with the Inductor Pro-Max. This heavy duty cart is made of 22-gauge steel with powder c...

This is a fairly used IP6-2 welder with 6 months limited warranty. Please see pictures for condition. Inverter MIG-MAG welder for the car body repa...

Spot Welding Machine with Inverter Technology Spot welder with Inverter Technology. Fully automatic function in standard-mode. Expert mode and Man...

Currently out of stock, please contact us for Special Order. Features: Stabilize 2 or more of the Universal Dollies Connects either side to side o...

Technical Data: Packing unit: 1 pc. Material: 42CrMo4 Dimensions: 97.5 mm Diameter: 34 mm

The powerful DF-PC203 Magnetic Paint Clamp from Dent Fix Equipment is a strong, professional, and fast method for securing parts for a controlled s...

The DF-3S is the perfect compliment to the DF-3 Measuring Tram Gauge. Measuring from 16.5" to 3'3" this tram takes point to point measurements in t...

Purchase the MD-700 Case, a replacement storage case for the Mini-Ductor® II(MD-700). Includes: One (1) replacement Mini-Ductor® II storage case