Products

JLR workstation blue hose replacement.

Polypropylene Sheet for Nitrogen Plastic Welder. The sheet is 1/8" thick, 12 inches long and 6 inches wide.

Polypropylene Strip, 3/4” x 1/16” - Natural - 1/2 lb for Nitrogen Plastic Welder.

The Whip Hose improves plastic repair efficiency by allowing technicians to easily switch between air tools and use the in-line air blower for prep...

This hose and wiring assembly features an improved melt-proof silicone hose, replacing the previous braided silicone hose and the older blue vinyl...

ABS Welding Rod Safety Data Sheet (SDS)  ABS plastic welding rod is used when welding ABS plastic. ABS (Acrylonitrile Butadiene Styrene) is a rigi...

Polyvance’s Airless Plastic Welding Tips are designed to efficiently melt plastic welding rods and ribbons, ensuring precise and effective repairs....

Cart for the Polyvance Nitro Fuzer Classic® nitrogen plastic welder.

This 120-volt ceramic heater core is specifically designed for installation within the Polyvance airless welder element assembly. It replaces the ...

EcoPrep is a zero-VOC water-based plastic cleaner that matches the performance of solvent-based cleaners when preparing plastic surfaces before rep...

FiberFlex Rod Safety Data Sheet (SDS) FiberFlex is a “universal” repair rod that sticks to nearly any plastic substrate. FiberFlex sticks great to ...

High-Density Polyethylene Welding Rod Safety Data Sheet (SDS) Product Description Polyvance High-Density Polyethylene (HDPE) Welding Rod is manufa...

Low-Density Polyethylene (LDPE) Welding Rod Safety Data Sheet (SDS) Low-density polyethylene (LDPE) plastic welding rod is used when welding low-d...

System Requirements and Technical Information The Nitrocell Nitrogen Generator provides a continuous supply of nitrogen for plastic welding. Featur...

Nylon + 15% Glass Fibre (PA+GF15) Welding Rod Safety Data Sheet (SDS) Product Description: The Polyvance PA+GF15 welding rod is designed for repai...

Nylon Welding Rod Safety Data Sheet (SDS)  Nylon plastic welding rod is used when welding nylon (PA) plastic. Nylon has a very high melting point ...

Polycarbonate Welding Rod Safety Data Sheet (SDS) Polycarbonate plastic welding rod is used when welding polycarbonate (PC) plastic. Polycarbonate...

Polypropylene Welding Rod Safety Data Sheet (SDS) Polypropylene plastic welding rod is used when welding polypropylene (PP) plastic. Polypropylene...

Quick-Release Hose Retrofit Kit If you purchased an 8000 series or 8200 series nitrogen plastic welder built before September 2020 and require a h...

Product Description: The Quick-Release Handle Assembly from Polyvance is a replacement handle kit for nitrogen/hot-air plastic welders, built to g...

The Shim Jim™ Tab Separator Tool is designed to help autobody technicians easily disassemble the snap-in tabs that secure trim to bumper covers. T...

Tab Saver Kit Flyer and Instructions The Tab Saver Kit makes it quick and easy for technicians to repair rectangular slot tabs and recessed holes f...

Made of polyoxymethylene (POM), the DF-AB712 is a set of 12 rigid dollies that are non-marking when impact against metal. The high abrasion resista...

Safely move a Porsche around your shop. These adapters will lock into the bottom of a 997 then lock into our Universal Dolly. Works on any Porsche ...

Another way to connect a Porsche to our dolly system if the suspension is removed from the vehicle. If the car is on 4 of our Universal Dollies the...

CATALOGUE | TECHNICAL SHEET Required by Rivian and VinFast The Celette BATPRO is a portable, full-rise X-lift (scissor table) built for safe, effi...

Required by Audi, Bentley, and GM (Buick, Cadillac, Chevrolet, and GMC). Product Description The PowerWeld PWAGFG Argon & CO₂ Regulator is engi...

Features: Pressure cylinder with 2-way function: press and pull Potential pressure force up to 90kN Engineered according OEM specifications for al...

Components List | Brochure | Instruction Manual The PR-205MV is the new compact, lightweight, microprocessor-controlled welding inverter suitable f...

Components List | Brochure The PR-220MV is a microprocessor-controlled, multi-process inverter Welder. All functions can be easily selected on the ...

5mm Contact Tip (5 Pk) for Weld-on Shafts, PR-3 Pack of 5.

Replacement Ram for the PR-5D Rivet Gun.

Overview: Power your tools with confidence using the Pro Spot International PRR-21 Battery, engineered specifically for the PR-5D rivet gun. Design...

Brochure | Component List The PR-5D Riveting and Bonding Station offers the perfect solution for demanding riveting work space environments. It no...

Components List Pro Spot Tesla Die Kit designed for the installation and removal SPRs (self-piercing rivets), Flow Form rivets hole preparation and...

Large arm for the PR-5D rivet gun.

Medium arm for the PR-5D rivet gun.

Replacement Ram for the PR-5D Rivet Gun.

Components List Pro Spot Ford and Starter Die Kit designed for the installation and removal SPRs (self-piercing rivets), Flow Form rivets hole prep...

Pro Spot Replacement SPR Adapter Locking Nut W/Centering Threads for the PR-5D Rivet Gun.

These premium heavy-duty Leather Welding Gloves is designed for a wide range of welding processes including MIG, TIG, and Stick. Offers good protec...

The WRD Pro Scraper system offers the safest standard in pinch-weld preparation. The finest razor blades designed for the task with a convenient di...

Precision brass fitting engineered for pneumatic and hydraulic systems. 1/8 MPT inlet connects seamlessly to 1/4 straight outlet, delivering reliab...

i5 spot welder, water-cooled, 500mm extension, U-Arm assembly. Includes: i5 Smart Spot Welder Weld Caps A, Female, 5RW | PS-030/15 Shank for i5 Sm...

Fixed Electrode O-Ring, 5PK - Arm Side.

Replace your Pro Spot chassis to spot gun command cable for PS-500 & PS-600.

Mount the Pro Spot Dust Extraction System on any shop wall. The Pro Spot Wall Mount Kit allows pivoting action and easy on/off docking.