Dent Fix Equipment

The DF-505CH is the replacement cable and handle for the MAXI weld unit on the DF-505/220V, DF-505/110V, and DF-505/DXE Steel Pulling systems.

The 33 piece DF-PDRKIT33 is the bundle of tools that will make the job easy. This paint-less dent repair kit contains an essential gathering of 33 ...

Taking point-to-point measurements from 1'4" to 11'11" (400-3640 mm) the DF-3DX Digital Tram Gauge user can measure in feet, inches, 1/16ths of an...

Manufactured in Switzerland, this extruded aluminum tram gauge is lightweight yet remains rigid when fully extended. The telescoping design allows ...

The DF-3S is the perfect compliment to the DF-3 Measuring Tram Gauge. Measuring from 16.5" to 3'3" this tram takes point to point measurements in t...

The DF-3TC5A Telescopic Measuring Tram is great for writing estimates or to quickly spot check a frame pull. No need to set up a complicated bench ...

The DF-3TC3A Telescopic Measuring tram is great for writing estimates or to quickly spot check a frame pull. No need to set up a complicated bench ...

The DF-MP050K is the ultimate hole punch kit provides the power and versatility to get any job done. The unique design of the cutter shears the met...

The DF-1667 Boron Killer is designed specifically for drilling through Boron Steel. This 8.0mm drill bit, made of Tungsten Carbide and with a speci...

Mega 6" C-Clamp (DF-SPD48M) for the DF-15DX Spot Weld Drill (Sold separately). Allows the drill bit to access deeper parts of the panel.

Large 3" C-Clamp (DF-SPD48L) for the DF-15DX Spot Weld Drill (Sold separately). Same C-Clamp that is included in the DF-15DX Kit.

A heavy-duty GPR glue puller kit that is in a league of its own!The DF-GPX Glue Puller Extreme will perform repairs on major panel damage with a m...

FLYER | MANUAL | EMITTER PIN REPLACEMENT | BATTERY REMOVAL | FILTER REPLACEMENT The StaticZap (DF-EZAP) is an essential tool for maintaining pristi...

Product Details Achieve a clean, OEM look every time with the DF-EZ10XL EZ Hole Punch & Lens Hole Maker XL, for quick and precise results. Get...

The Parking Sensor and Lens Hole Maker (Part No. DF-EZ10) from Dent Fix Equipment is the precise and clean way to create holes in order to install...

Product Details Do you have the Dent Fix EZ Punch & Lens Hole Maker (DF-EZ10) but want to upgrade to the XL punch sizes? The EZ Punch & Len...

The DF-WG1 Welding Ground out performs standard magnetic ground block. It is the perfect upgrade for the MAXI Steel Dent Pulling Station but the un...

The Grounding Magnet DF-GM makes grounding and connecting to your system's ground cable effortless and reliable, with 350 AMP pull. Its powerful ma...

Male extraction die for self piercing riveter.

Extraction die set E1 + E2 for self piercing riveter.

Hole punch die set T1 + T2 for self piercing riveter.

3.3 mm SPR die set A1 + A2 for self piercing riveter.

Flow form die set F1 + F2 for self piercing riveter.

The Dent Fix DF-CT888, Swivel Slimline Plastic Riveter compact plastic rivet pliers is perfect for tight and hard to reach places. Use on vehicles ...

The 27 piece DF-623TPS set can easily and safely remove interior and exterior trim pieces. Helps remove air conditioning vents, door trim clips, da...

The DF-1465 bit is our 6.5mm or approximately 1/4-inch High Speed Steel Cobalt (HSCO) spot weld bit. The twist is smaller than the shank which is 8...

The DF-1480 bit is our 8.0 mm or approximately 5/16th of an inch High Speed Steel Cobalt (HSCO) spot-weld bit. The twist is the same size as the sh...

The DF-1780 is specifically designed for the rigours of spot weld drilling, these Germany made bits can be used with any 3/8-inch drill. Also avail...

The DF-1610 bit is our 10.0mm and the largest diameter High Speed Steel Cobalt (HSCO) spot-weld bit we offer. The twist is larger than the shank wh...

The DF-1680TC Titanium Carbon Nitride (TiCN) coating on this bit will lower friction and keep the edge sharp longer than regular drill bits. The tw...

The DF-1610TC Titanium Carbon Nitride (TiCN) coating on this bit will lower friction and keep the edge sharp longer than regular drill bits. The tw...

The DF-1680T is our most popular spot weld drill bit. 8.0mm or 5/16th is the most common size of spot welds that need to be removed. The Titanium c...

The DF-1780T is specifically designed for the rigours of spot weld drilling, these Germany made bits can be used with any 3/8-inch drill. Centring ...

The DF-1610T Titanium coating on this bit will help prevent the bit from dulling due to overheating. The twist is the same size as the shank which ...

The Slot Pliers (DF-SP820) from Dent Fix Equipment are an essential tool when MIG brazing High Strength Steel (HSS) and Ultra High Strength Steel (...

The DF-8 is the most efficient hole punch that you will ever own. You will be amazed at how little pressure is needed to punch out holes. With the ...

The DF-516PF pliers combine a 5/16th hole punch with a flange tool. The swiveling head allows you to change from one function to the other with the...

I-CAR has recommended a 5/16th hole when plug welding on frame rails and other structurally significant points. An adjustable depth allows precisio...