Wielander+Schill Welding Equipment & Accessories

Gas-Shielded Welder for steel and aluminum welding - tested and approved by Honda, TESLA, and Acura. VW version is also available. This welding mac...

The new premium shielded arc welding device VAS 821 003 is the best solution for car body repair shops. Features: It helps you carry out high-qual...

C-arm No. 1 with curved C-Electrode. Technical Data: Packing unit: 1 pc. Opening width: 70 mm Opening depth: 150 mm

C-arm No. 2 for Wheel Arches. Electrode B water-cooled. Delivery Contents: 1 x electrode type A 1 x electrode type B

C-arm No.3 for GT Spot Welder with curved C-Electrode. Tested and approved by, VW, Audi, Porsche, SEAT, Lamborghini, Bentley, Bugatti, Ford, Hyunda...

C-arm No.4 with electrode holder and 260mm electrode. Tested and approved by Ford and Hyundai. Recommended by BMW, MINI, Rolls-Royce, Mercedes Benz...

Technical Data: Packing unit: 1 pc. Material: Copper-zirconium Specifics: Shape A

Electrode set for c-arm no.1. Technical Data: Packing unit: 1 pc. Opening width: 70 mm Opening depth: 150 mm Delivery Contents: 28 mm Electrode ...

Delivery Contents: Includes copper sealing washer Technical Data: Dimension: 101.5 mm

170 mm Electrode set for C-Arm No. 4 GT Spot Welder. Delivery Contents: 2 pieces incl copper sealing washer Technical Data: Dimension: 170 mm

Can be used on the Spot Welder gun side in combination with: C-arm No. 1  for GT Spot Welder C-arm No. 2 for Wheel Arches C-arm No. 3 for GT Spot ...

Electrode caps Ø 16 mm - water-cooled Technical Data: Packing unit: 1 pc. Length x Width x Height: 88 x 80 x 25 mm

Cooling System for Invertaspot GT AutomaticComes in use with all welding machines, especially spot welders. Protects the sensitive surfaces against...

Electrode for c-arm no. 1. Also included in electrode set no. 11. Technical Data: Packing unit: 1 pc. Dimension: 80 x 47 x 28 mm

Hexagonal electrodes fitting for electrode attachment with rocker - type "Passat". Technical Data: Packing unit: 2 pieces Material: Copper-zirconi...

Electrode caps for water cooled spoon electrode form B (497072). Technical Data: Packing unit: 6 pcs. Material: Copper-zirconium Diameter: 13 mm S...

Technical Data: Packing unit: 6 pcs. Diameter: 16 mm

Technical Data: Packing unit: 6 pcs. Material: Copper-zirconium Diameter: 16 mm Specifics: Shape A-32

Technical Data: Packing unit: 4 pieces Material: Copper-zirconium Specifics: Shape F

Technical Data: Packing unit: 4 pcs. Diameter: 16 mm Material: Copper-zirconium Specifics: Shape D

Delivery Contents: 2 x electrode cap type B (497079) 2 x electrode cap type H (497020) Technical Data: Packing unit: 4 pcs. Diameter: 16 mm

Technical Data: Packing unit: 4 pcs. Diameter: 16 mm Material: Copper-zirconium Specifics: Shape B

Electrode caps remover. Check pictures to see how it is used.

A pack of 2 electrodes copper washers for the InvertaSpot GT Automatic.

Spoon shaped electrode + electrode caps diameter 13 mm (497006), Form B for c-arm no.2. Technical Data: Material: Copper-zirconium Packing unit: ...

Electrode for c-arm no. 1. Also included in electrode set no. 11. Technical Data: Material: Copper-zirconium Packing unit: 1 pc. Dimension: 121 mm

Electrode and Cu washer for C-arm No. 5. Technical Data: Dimension: 135mm

3G Torch Steel / Aluminium. Technical Data: Packing unit: 1 pc. Material: Copper Dimension: 63.5 mm Diameter: 22 mm, 12.5 mm (inside)

Technical Data: Diameter: 0.8 mm Packing unit: 10 pcs. Dimension: M6x28

Technical Data: Diameter: 8 mm, 6 mm Packing unit: 10 pcs Dimension: 28 mm

Technical Data: Diameter: 1.0 mm Packing unit: 10 pcs. Dimension: M6x28

Technical Data: Diameter: 8 mm Packing unit: 10 pcs Dimension: 28 mm

Technical Data: Packing unit: 1 pc. Diameter: 13 mm Dimension: 37 mm

For the protection of the spot welding system against dust, dirt, and water. With lateral velcro fastening.

For aluminium welding torches including collet and o-ring / wire sizes Ø: 1.0-1.2 mm Technical Data: Packing unit: 1 pc. Material: Plastic Length:...

For steel welding torches Steel welding wire Ø: 0.8 - 1.0 mm Technical Data: Packing unit: 1 pc. Material: Plastic Length: 3 m Specifics: Colour b...

Technical Data: Material: Steel Packing unit: 2 pcs Dimension: 12.1 mm Diameter: 37 mm

Technical Data: Material: Steel Packing unit: 2 pcs Dimension: 12.1 mm Diameter: 37 mm

Technical Data: Diameter: 0.8 mm Packing unit: 5 kg Material: CuSi3 Specifics: D-200 roll

Technical Data: Certification: CE Diameter: 0.8 mm Specifics: D200 role Packing unit: 5 kg Material: SG2

Technical Data: Packing unit: 1 pc. Diameter: 1.0 mm Material: AlSi5 Specifics: D200 roll

Technical Data: Specifics: D-200 roll Packing unit: 2 kg Material: AlMg5 Diameter: 1.2 mm

High-strength MAG welding wire with Honda approval. It has a nominal strength of 980 MPa (142 ksi). This wire must be used for MAG welding work on ...

Technical Data: Diameter: 1.2 mm Specifics: D200 roll Packing unit: 2 kg Material: AlMg3

The welding wire on the D-200 plastic roller made of copper-silicon alloy with a low melting point for TIG or MIG welding of galvanized steel sheet...

Welding wire on D-200 plastic roller made of aluminum-silicon alloy for TIG or MIG welding of aluminum-silicon alloys. Technical Data: Diameter:...

Welding wire on D-200 plastic roll made of aluminum-silicon alloy (aluminum cast alloys) for TIG or MIG welding of aluminum-silicon alloys. Appli...

Welding wire on D-200 plastic roll is made of aluminum-magnesium alloy for TIG or MIG welding of aluminum alloys. Applicable shielding gases (EN ...