Titanium Tools and Equipment Inc

Used with brass pipe to repair the Miracle ground clamp, MME-00.

Used with shrink tube to repair the Miracle ground clamp, MME-00.

The Airopower pull hook is used with the 2 meters chain and is used for chain pulls.

The Airopower wedge head is used for pointed areas, bars, and corners.

The Airopower v-base is used on hard areas of the vehicle like the engine support, front rails, and pillars.

The Airopower plunger toe is used together with the collar toe for pushing and pulling vehicle parts like the door space.

The Airopower collar toe is used together with the plunger toe for pushing and pulling vehicle parts like the door space.

The Airopower serrated saddle is used to push flat areas on the vehicle.

The Airopower female connector can be attached to the front (piston) of the Airopower ram as an extension or a connector. It is used to connect att...

The Airopower male connector can be attached to the rear connector of the Airopower ram as an extension or a connector. It is used to connect attac...

This high tef oil is great for lubricating the cable that attaches to Easy Puller I and II for smooth operation and less wear of the clips and tool...

It is a replacement special bit for the Easy Puller III.

Yellow Cone Shaped Multipads 6 x 22 x 156. Packing Unit: 3 pieces.

Suction cup with pull release Loading capacity: 10kg / 22lbs Suction cup diameter: 75 mm or 3 inches Complete suction cup with the handle: 7 inche...

Red Flat Multipads 6 x 22 x 156. Packing Unit: 3 pieces.

To be used with the mini extractor, 31305 and mini extractor kit, 31340.

Included in this Kit: Mini extractor for suction cups striker 250gr | 31305 Extension for wedges | 3134000 Radial wedge medium point | 31212 Domed...

Yellow Round Suction Cups Ø 40. Packing Unit: 10 pieces.

Yellow Oval Suction Cups Ø 33 x 47. Packing Unit: 10 pieces.

Violet Oval Suction Cups Ø 33 x 47. Packing Unit: 10 pieces.

Violet Round Suction Cups Ø 40. Packing Unit: 10 pieces.

Red Round Suction Cups Ø 11. Packing Unit: 10 pieces.

Blue Round Suction Cups Ø 36. Packing Unit: 10 pieces.

Grey Flat Multipads 6 x 50 x 156. Packing Unit: 3 pieces.

Green Spherical Multipads 6 x 22 x 156. Packing Unit: 3 pieces.

Blue Flat Multipads 6 x 36 x 156. Packing Unit: 3 pieces.

For use with Miracle System Tools. Included in this Kit: Easy Puller, and slide hammers hook for use with round pads | MSG-HK1 Strong Puller, lever...

Aluminum alloy One Piece casting Light and well balanced Anti-shock grip Storage hook Can be used as chisels

The Miracle hammer rubber face vertical peen has the following features: Rubber face prevents marring of surfaces Aluminum alloy One Piece casting...

The Miracle hammer rubber face horizontal peen has the following features: Aluminum alloy One Piece casting Light and well balanced Anti-shock gri...

Included in this Kit: Miracle Hammer Horizontal Peen, Large | MHS-01 Miracle Hammer Horizontal Peen, Medium | MHS-02 Miracle Hammer Horizontal Pe...

The Easy Puller III is the newest easy puller from Star. Featuring a rechargeable LED light to highlight the imperfections in the panel. A bearing ...

Easy puller II is a simplified version of the Easy puller 10Z. With a fixed frame this is an economical way to repair small dings and finish panels...

The spot welding tip allows you to tack thin patches for repair quickly and easily prior to MIG welding.

Aluminum alloy One Piece casting Light and well balanced Anti-shock grip Storage hook Can be used as chisels

The roll patching tip allows you to repair small torn areas on a panel quickly and easily.

Features: Rotating clamp eliminates damage to the cable over time No switch needed, welds on contact Included in Kit: ONA-01: Hand Type ONA-02: ...

Features: Easy to pull out outer panels Push and pull mechanism Strong but light weight Included in this Kit: Puller Frame Corner Foot Flat Foot...

This is the attachment cable for attaching Easy Puller I and II to the welding machine. It has 1 clip and one Pin. The Pin inserts in to the end of...

Pull and hammer at the same time Simple and effective Flexible - can be used in various ways

Feel and apply the necessary tension by hand Can be used for pulling and removing Hand puller kit, 2 pieces  

This is a high quality gearless grinder that has excellent feel for precise grinding of panels. With the Miracle system, we only grind where we wil...

The bit cutter trims the straight and twisted key by one mm each time you use the bit cutter providing you with a new edge each time. It is particu...

Included in this Kit: Manual and Automatic Stud Welder complete with slide hammer, accessory box, and Miracle Grip. ESA inspected | MS-6 Miracle ...

Included in this Kit: Manual and Automatic Stud Welder complete with slide hammer, accessory box, and Miracle Grip. ESA inspected | MS-6 Miracle S...

Included in this Kit: Manual and Automatic Stud Welder complete with slide hammer, accessory box, and Miracle Grip. ESA inspected | MS-6 Miracle S...

Aluminum alloy One Piece casting Light and well balanced Anti-shock grip Storage hook Can be used as chisels

Rubber head cover only, hammer not included. To be used with Miracle Hammer Rubber Face Horizontal Peen (MHSG-03) and Miracle Hammer Rubber Face Ve...